• GL-368A
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different cutters.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

This newly designed 4-ways vises set helps your duplication with unsurpassed accuracy.
The vises are much stronger than before.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

• GL-368C
  

THE specially designed two horizontal motion wheels control the motions of carriages individually, with the golden wheel controlling the right carriage and the small white handle controlling the left one.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

This newly designed 4-ways vises set helps your duplication with unsurpassed accuracy.
The vises are much stronger than before.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

• GL-4000
  

THIS custom-made, versatile code machine cuts keys with different angles of inclination for either right or left turn keys.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS
  

 

 

• GL-888A
  

IN combination with both left and right carriages, this multi-functional key dupli-cator is equipped with two different cutters.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways rotating jaws can be easily indexed to accommodate all kinds of keys.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

• GL-888C
  

THE specially designed two horizontal motion wheels control the motions of carriages individually, with the golden wheel controlling the right carriage and the small white handle controlling the left one.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways rotating jaws can be easily indexed to accommodate all kinds of keys.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

 

• GL-888K
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different cutters.

■ Equipped with High Speed Steel Cutter.
■ Clear Depth Calibration on Guide Adjusting Dial and easy amendment.
■ Vise handles get ball bearing device, tighten and flexible operation.
■ Thermal Circuit breaker : Power off to avoid any damage on the condition that the circuit is overload fuse.

• LEET CARRIAGE:
  

■ The 2 way vise can refer your need to hold till 128mm key and any type of double side grooved key.

• RIGHT CARRIAGE:
  

■ Both upper and lower section of the vise duplicate 128mm keys and special / unusual keys that extra adapter is needed. Ex: Semi-circular key, Square key, Flat key, &Square shaped keys.

• GL-888AL
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different high speed steel cutters. high precise, save times & elevate efficiency.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways vise can refer your need to hold till to 115mm key and any type of double side grooved key.

You can use the key gauge to place shouldered keys on right position of grooved vise.

The new design of 4 way vise present you more precise measurements while duplicating keys.

Our engineers have added an extra fixing screw below the guide which is to protect the Cutter and vise not to be damaged while duplicating keys.

• RIGHT CARRIAGE
  

Both upper and lower section of the vise duplicate 128mm keys and special / unusual keys that no extra adapter is needed. EX. Semi-circular key. Square key, Round shaft key, Flat key, & Square shaped keys.

The vise carriage can be locked into the stationary or into swivel position.

• GL-888AL-II
  

■ Equipped with C/W Tungsten carbide cutter.
■ Clear Depth Calibration on Guide Adjusting Dial and easy amendment.
■ Vise handles get ball bearing device, tighten and flexible operation.
■ Specific Designed jaw handles to accurately cut
bit & double bit keys.
■ Equipped with LED lamp
■ High accuracy, save a working-hour and strengthen
efficiency.
■ Thermal Circuit Breaker.
■ Power off to avoid any damage on the condition that
the circuit is overload fuse. Abus® and Abloy® are
registered trade marks.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

Left-hand carriage: flat cylinder, vehicle keys & cruciform keys.

• RIGHT CARRIAGE
  

Right-hand carriage: bit and double bit keys, post box keys and special keys such as Abus® and Abloy® keys.

 

 

 

 

 

 

 

 

 

• GL-6000
  

THIS custom-made, versatile code machine cuts keys with different angles of inclination for either right or left turn keys. Suitable for factory production, it duplicates four keys of one code simultaneously.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS

 

 

 

 

• GL-9000
  

Digit control key making machine.
Special designed digit control key making machine may make semi circular or square key by changing vise only.
Production upon customer's exclusive requirement of specification.
Automatic code selection by computer & permit user to set up cycle number freely upon their requirement.
Equipped tungsten carbide cutters.
Easy operation, times save & high efficiency.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

• GL-203AHD
  

THE multi-functional clamp duplicates the dimple cut keys and snake cut keys. The horizontal carriage handle assembly permits user easy of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203BHD
  

AN exclusive system with synchronized tilting axis permits perfect duplication of keys with angular cuts. The clamp can be slanted gradually and progressively
to any angle between 0 to 45 clockwise & counter-
clockwise. The horizontal carriage handle assembly
permits user easy of horizontal movement when
operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203CHD
  

THIS specially designed clamp may duplicate tubular key of diameter 3mm-16mm, dimple cut keys & snake cut keys.
The horizontal carriage handle assembly permits user
ease of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203KHD
  

THE multi-functional clamp duplicates the dimple
cut keys and snake cut keys. The horizontal carriage
handle assembly permits user ease of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-303A
  

■ Multi-Functional key clamp can be used to commodate flat dimple key & snake/profile cutting keys like kaba, keso & benz.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, suer can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ Attached adaptors can be fixed on the clamp for duplicating 7 pins standard tubular key (outer diameter 9.6 mm & inner diameter 7.85/7.9mm).

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-303B
  

■ Exclusive system with synchronized tilting axis permits clamp to be slanted gradually and progressively to any angle between 0 to 45 clockwise & counter-clockwise.
■ The property is very useful for perfect duplication of keys with angular cuts.
■ The pitch angle indicator can show you the cutting angle precisely.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, user can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts.
■ Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ The speed adjusting knob, you can adjust the cutter's R.P.M. upon your requirement.
■ Hight precise, times save & hight efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-303K
  

■ Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, user can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ Attached adaptors can be fixed on the clamp for duplicating 7 pins standard tubular key (outer diameter 9.6 mm & inner diameter 7.85/7.9mm).

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• 角固式夾具可夾持各種不規則狀鎖匙
  

■ 多功能夾具，可複製平面鑽孔及蛇形溝槽切割之鎖匙。如KABA、KESO、BENZ。
■ 新型深度微調刻畫鈕可幫助使用者校正更加精確。
■ 水平搖座握把組可靈活操作,採用培林滑軌十字滑板,使夾具水平移動容易。
■ 特殊準具內的彈性設計可預先找到鑽孔正確位置後，刀具才切割，可增加其精準度。
■ 複製蛇形溝槽鎖匙如BENZ鎖匙時，可將垂直活動把手及準具彈簧固定鈕鎖緊,來固定其切削深度。
■ 十字滑板智慧型控制鈕，是特別針對複製蛇形及溝槽形鎖匙所設計,鎖緊此控制鈕,緊靠著母鎖匙溝槽,會產生自動靠模的彈性作用。
■ 所附筒型鎖匙附件可夾持於夾具上,複製7珠標準規格的筒型鎖匙(外徑9.6mm，內徑7.85/7.9mm)。

• 鎖匙圖樣：
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-030
  

■ Easy Operating, Simple Style manual machine.
■ 4 way jaws which can clamp a large variety of key blank including double sided keys.
■ Equipped with High Speed Steel single angle cutter.
■ Fixing knobs with bearing ball can help to hold the key tightly.
■ High precise, save times & elevate efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

 

• GL-320
  

GL-320 manual keys duplicator is a lightweight, suitable for carrying out the work, can be equipped with indoor electric power or car charger. It weighs only 7 kg, can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ Optional AC or DC voltage.
■ The 4-ways vise can refer your need to hold till to 115mm key.
■ Can copy any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.
■ With lightweight easy to use.
■ Equipped with V type HSS cutter.
■ Rechargeable Power Battery Optional.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

• GL-750
  

Semi-Automatic (Lever) Operation key machine
The GL-750 key machine is the top of the line cylinder key cutting machine for professional locksmiths. It will cut most cylinder keys including standard motorcycle / car cylinder keys and cruciform keys. This model delivers unsurpassed accuracy and cutting performance.
The 4-way jaws can refer your need to hold till to 120mm key and any type of double side grooved key.

■ Automatic power on-off controlled by micro-switch, activated by raising or lowering the carriage.
■ Carriage design flexibility to provide adequate pressure when cutting keys to increase the accuracy of key.
■ Lamp inside the machine design can directly illuminate the surface of the carriage and vise jaw.
■ Equipped with V type angle cutter.
■ Extra fixing screw below the guide which is to protect the cutter and jaws not to be damaged while duplicating keys.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-330
  

■ The duplicator is designed for duplicating “FLAT” keys, such as those used with popular safe deposit and locker locks.
■ Equipped with slotting saw of tungsten carbide material.
■ Can make lever & side bitted flat key of any length.
■ Can make arc cutting to make key turning.
■ New designed vise jaw rotate button, easily rotating for duplicating.
■ Highly accuracy and efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

• GL-12
  

Special designed milling machine can make any kind of groove of key upon your requirement by changing suitable cutter. High precise, Save times & elevate efficiency. Equipped with different cutters.

• Synchronized turning design of clamp can be used to cut round keys with dimples around like SB keys.
  

Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the latest design and new four-sided vise, depending on the type of key, there are four-sided, which can be selected according to the needs, rotated, and work more smoothly.
■ Equipped with a DC brushless inverter motor, quiet and energy saving
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Synchronous tilt designed with flat oblique key
  

Unique system with synchronized tilting axis, adjustable angle between 0-45 degrees, suitable for copying the flat oblique keys

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the adaptor for tubular keys to duplicate
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters
■ Equipped with a four-grid milling cutters and tracers fixture for easy access

• FOR FOLLOWING KEYS
  

 

 

 

 

• Synchronous tilt designed with flat oblique key
  

Unique system with synchronized tilting axis, adjustable angle between 0-45 degrees, suitable for copying the flat oblique keys

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the female key groove, resulting in the elastic effect of the automatic modeling
■ Built-in tubular key clamp pointing for easy duplicating
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Newly developed four-sided rotating vise with drill and slotting key
  

Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys.
Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the latest design and new four-sided vise, depending on the type of key, there are four-sided, which can be selected according to the needs, rotated, and work more smoothly.
■ Equipped with a DC brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Multifunctional duplicating key machine
  

Suitable for copying drilling and snake groove cutting keys, such as KABA, KESO, BENZ…etc

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys
Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling ■ Equipped with the adaptor for tubular keys to duplicate
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Magnifier Tools.

This picker that is based on high technical medical instruments is developed to be high efficient pick tools in locksmiths field. It can help locksmiths to deal with the problem of even high-level vehicle like Benz & B.M.W.
Combined with searchlight, high efficient magnifier & super harden picking bar, it can see through various type of wafer cylinders to help you pick cylinder & make a new keys for car or/and motorcycle lock. Easy operation & save your times.
The new design that can change the direction of the lever, 360 degree rotation, and it can be freely set according to the desired direction!

 

 

• GL-202 Key Clip
  

With this product, you can clip all kinds of plate keys including car key & motorcycle keys.

 

 

• GL-206 “Exclusive” Pick set
  

■ 10 Handles with exchangeable Pick Blades.
■ 4 pick blades for Pin and Disc Tumbler Locks.
■ 5 pick blades for dimple key system.
■ 1 extractor blade.
■ 1 tension tool.

 

 

 

 

 

 

 

 

• Rechargeable Two-Way Duplicating Key Cutting Machine

For carrying out the work, with 12V car charger electricity. And also it’s with rechargeable batteries, solved the uneasy on power issue outsider.

It can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ The 4-ways vise can refer your need to hold till to 128mm key.
■ Equipped with V type Tungsten cutter.
■ Equipped with Nylon Brush.
■ Rechargeable Power Battery Optional.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• GL-320L MANUAL DUPLICATOR

GL-320 manual keys duplicator is a lightweight, suitable for carrying out the work, can be equipped with indoor electric power or car charger. It weighs only 7 kg, can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ ⦁ The 4-ways vise can refer your need to hold till to 128mm key.
■ Equipped with V type Tungsten cutter.
■ Equipped with Nylon Brush.
■ Equipped with Nylon Brush.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• The latest patent new key duplicating machine
  

■ Equipped with double durable tungsten steel blades.
■ Equipped with a new patent right vise jaw set that to increase the cutting process convenience.
■ The latest patents for left and right tracer, the right side is scalable, the feature is attached the spring and adjust to the fixed point can be positioned when the preparation of the key is not easy to shift.
■ Thumb screw got the bearing, strongly tight.
■ LED lighting.
■ Current overload protection, when overheating, the machine got automatic power to protect the device.
■ Left and right vise width 128MM with market needs.
■ Acceptable special with remote control key, square angle cutting key…etc.
Taiwanese Patent No:M540704

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• The latest patent new key duplicating machine
  

■ Equipped with high-speed steel plated titanium blade and full tungsten steel saw.
■ Equipped with a new patent right vise jaw set that to increase the cutting process convenience.
■ The latest patents for left and right tracer, the right side is scalable, the feature is attached the spring and adjust to the fixed point can be positioned when the preparation of the key is not easy to shift.
■ Thumb screw got the bearing, strongly tight.
■ LED lighting.
■ Current overload protection, when overheating, the machine got automatic power to protect the device.
■ Left and right vise width 128MM with market needs.
■ Acceptable special with remote control key, square angle cutting key…etc.
Taiwanese Patent No:M540704

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• New style patented multifunctional key duplicating machine
  

■ New style patented base horizontal flip designed, can move forward, backward, left and right. The cutting key has no bevel; the base is turned over for easy gripping of the key
■ The newly designed four-sided jaw can be directly and easily rotated to change sides.
■ Can be directly prepared with remote control car key, long key... etc.
■Equipped with LED lamps
■Equipped with automatic power-off protection device

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• GL-368A
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different cutters.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

This newly designed 4-ways vises set helps your duplication with unsurpassed accuracy.
The vises are much stronger than before.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

• GL-368C
  

THE specially designed two horizontal motion wheels control the motions of carriages individually, with the golden wheel controlling the right carriage and the small white handle controlling the left one.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

This newly designed 4-ways vises set helps your duplication with unsurpassed accuracy.
The vises are much stronger than before.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

• GL-4000
  

THIS custom-made, versatile code machine cuts keys with different angles of inclination for either right or left turn keys.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS
  

 

 

• GL-888A
  

IN combination with both left and right carriages, this multi-functional key dupli-cator is equipped with two different cutters.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways rotating jaws can be easily indexed to accommodate all kinds of keys.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

• GL-888C
  

THE specially designed two horizontal motion wheels control the motions of carriages individually, with the golden wheel controlling the right carriage and the small white handle controlling the left one.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways rotating jaws can be easily indexed to accommodate all kinds of keys.

• RIGHT CARRIAGE
  

Two layers jaws can duplicate the special keys.
No extra accessory is required.

 

 

 

 

 

 

 

 

• GL-888AL
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different high speed steel cutters. high precise, save times & elevate efficiency.

• FOR FOLLOWING KEYS
  

 

• LEFT CARRIAGE
  

The 4-ways vise can refer your need to hold till to 115mm key and any type of double side grooved key.

You can use the key gauge to place shouldered keys on right position of grooved vise.

The new design of 4 way vise present you more precise measurements while duplicating keys.

Our engineers have added an extra fixing screw below the guide which is to protect the Cutter and vise not to be damaged while duplicating keys.

• RIGHT CARRIAGE
  

Both upper and lower section of the vise duplicate 128mm keys and special / unusual keys that no extra adapter is needed. EX. Semi-circular key. Square key, Round shaft key, Flat key, & Square shaped keys.

The vise carriage can be locked into the stationary or into swivel position.

• GL-888K
  

IN combination with both left and right carriages, this multi-functional key duplicator is equipped with two different cutters.

■ Equipped with High Speed Steel Cutter.
■ Clear Depth Calibration on Guide Adjusting Dial and easy amendment.
■ Vise handles get ball bearing device, tighten and flexible operation.
■ Thermal Circuit breaker : Power off to avoid any damage on the condition that the circuit is overload fuse.

• LEET CARRIAGE:
  

The 2 way vise can refer your need to hold till 128mm key and any type of double side grooved key.

• RIGHT CARRIAGE:
  

Both upper and lower section of the vise duplicate 128mm keys and special / unusual keys that extra adapter is needed. Ex: Semi-circular key, Square key, Flat key, &Square shaped keys.

• GL-6000
  

THIS custom-made, versatile code machine cuts keys with different angles of inclination for either right or left turn keys. Suitable for factory production, it duplicates four keys of one code simultaneously.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS

 

 

 

 

• GL-203AHD
  

THE multi-functional clamp duplicates the dimple cut keys and snake cut keys. The horizontal carriage handle assembly permits user easy of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203BHD
  

AN exclusive system with synchronized tilting axis permits perfect duplication of keys with angular cuts. The clamp can be slanted gradually and progressively
to any angle between 0 to 45 clockwise & counter-
clockwise. The horizontal carriage handle assembly
permits user easy of horizontal movement when
operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203CHD
  

THIS specially designed clamp may duplicate tubular key of diameter 3mm-16mm, dimple cut keys & snake cut keys.
The horizontal carriage handle assembly permits user
ease of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-203KHD
  

THE multi-functional clamp duplicates the dimple
cut keys and snake cut keys. The horizontal carriage
handle assembly permits user ease of horizontal movement when operating machine.

• FOR FOLLOWING KEYS
  

 

 

• GL-303A
  

■ Multi-Functional key clamp can be used to commodate flat dimple key & snake/profile cutting keys like kaba, keso & benz.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, suer can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ Attached adaptors can be fixed on the clamp for duplicating 7 pins standard tubular key (outer diameter 9.6 mm & inner diameter 7.85/7.9mm).

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-303B
  

■ Exclusive system with synchronized tilting axis permits clamp to be slanted gradually and progressively to any angle between 0 to 45 clockwise & counter-clockwise.
■ The property is very useful for perfect duplication of keys with angular cuts.
■ The pitch angle indicator can show you the cutting angle precisely.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, user can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts.
■ Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ The speed adjusting knob, you can adjust the cutter's R.P.M. upon your requirement.
■ Hight precise, times save & hight efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-303K
  

■ Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.
■ New type micro adjusting scale can help the adjusting work more precise.
■ Horizontal action lever can make the cross plate which is with ball bearing to be moved smoothly & easily.
■ Special designed tracer spring can make tracer have spring property to aim at the hole firstly, then cut so it help user to avoid any miss-cutting.
■ While make the snake/profile cut key, user can lock both the vertical action lever & tracer spring set to fix your cutting depth.
■ Cross plate intelligent control knob is special designed for slotting cut & snake/profile cuts. Lock it, there will have a spring property to lean against the edge of cut area automatically.
■ Attached adaptors can be fixed on the clamp for duplicating 7 pins standard tubular key (outer diameter 9.6 mm & inner diameter 7.85/7.9mm).

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-030
  

■ Easy Operating, Simple Style manual machine.
■ 4 way jaws which can clamp a large variety of key blank including double sided keys.
■ Equipped with High Speed Steel single angle cutter.
■ Fixing knobs with bearing ball can help to hold the key tightly.
■ High precise, save times & elevate efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

 

• GL-750
  

Semi-Automatic (Lever) Operation key machine
The GL-750 key machine is the top of the line cylinder key cutting machine for professional locksmiths. It will cut most cylinder keys including standard motorcycle / car cylinder keys and cruciform keys. This model delivers unsurpassed accuracy and cutting performance.
The 4-way jaws can refer your need to hold till to 120mm key and any type of double side grooved key.

■ Automatic power on-off controlled by micro-switch, activated by raising or lowering the carriage.
■ Carriage design flexibility to provide adequate pressure when cutting keys to increase the accuracy of key.
■ Lamp inside the machine design can directly illuminate the surface of the carriage and vise jaw.
■ Equipped with V type angle cutter.
■ Extra fixing screw below the guide which is to protect the cutter and jaws not to be damaged while duplicating keys.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• GL-12
  

Special designed milling machine can make any kind of groove of key upon your requirement by changing suitable cutter. High precise, Save times & elevate efficiency. Equipped with different cutters.

• GL-330
  

■ The duplicator is designed for duplicating “FLAT” keys, such as those used with popular safe deposit and locker locks.
■ Equipped with slotting saw of tungsten carbide material.
■ Can make lever & side bitted flat key of any length.
■ Can make arc cutting to make key turning.
■ New designed vise jaw rotate button, easily rotating for duplicating.
■ Highly accuracy and efficiency.

• FOR FOLLOWING KEYS
  

 

 

 

• Synchronized turning design of clamp can be used to cut round keys with dimples around like SB keys.
  

Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the latest design and new four-sided vise, depending on the type of key, there are four-sided, which can be selected according to the needs, rotated, and work more smoothly.
■ Equipped with a DC brushless inverter motor, quiet and energy saving
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Synchronous tilt designed with flat oblique key
  

Unique system with synchronized tilting axis, adjustable angle between 0-45 degrees, suitable for copying the flat oblique keys

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the adaptor for tubular keys to duplicate
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters
■ Equipped with a four-grid milling cutters and tracers fixture for easy access

• FOR FOLLOWING KEYS
  

 

 

 

 

• Synchronous tilt designed with flat oblique key
  

Unique system with synchronized tilting axis, adjustable angle between 0-45 degrees, suitable for copying the flat oblique keys

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys Lock this button, next to the female key groove, resulting in the elastic effect of the automatic modeling
■ Built-in tubular key clamp pointing for easy duplicating
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Newly developed four-sided rotating vise with drill and slotting key
  

Multi-functional key clamp can be used to common flat dimple key & snake /profile cutting keys like KABA, KESO & Benz.

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys.
Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling
■ Equipped with the latest design and new four-sided vise, depending on the type of key, there are four-sided, which can be selected according to the needs, rotated, and work more smoothly.
■ Equipped with a DC brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Multifunctional duplicating key machine
  

Suitable for copying drilling and snake groove cutting keys, such as KABA, KESO, BENZ…etc

■ Equipped with a new calibrated tracer accuracy adjustment button, each rotation is 0.02mm, the depth can be positioned
■ New design touch operation panel: Motor start button﹑Tracer depth adjustment button﹑Motor speed indicator, Motor RPM adjusting knob,LED ON/OFF switch
■ Equipped with a cross-slide smart control, specially designed for serpentine and grooved keys
Lock this button, next to the key groove, resulting in the elastic effect of the automatic modeling ■ Equipped with the adaptor for tubular keys to duplicate
■ Equipped with a brushless inverter motor, quiet and energy saving
■ Equipped with a new quick release fixture for easy calibration assembly
■ Equipped with new tungsten steel cutters

• FOR FOLLOWING KEYS
  

 

 

 

 

• Magnifier Tools.

This picker that is based on high technical medical instruments is developed to be high efficient pick tools in locksmiths field. It can help locksmiths to deal with the problem of even high-level vehicle like Benz & B.M.W.
Combined with searchlight, high efficient magnifier & super harden picking bar, it can see through various type of wafer cylinders to help you pick cylinder & make a new keys for car or/and motorcycle lock. Easy operation & save your times.
The new design that can change the direction of the lever, 360 degree rotation, and it can be freely set according to the desired direction!

 

 

• GL-202 Key Clip
  

With this product, you can clip all kinds of plate keys including car key & motorcycle keys.

 

 

• GL-206 “Exclusive” Pick set
  

■ 10 Handles with exchangeable Pick Blades.
■ 4 pick blades for Pin and Disc Tumbler Locks.
■ 5 pick blades for dimple key system.
■ 1 extractor blade.
■ 1 tension tool.

 

 

 

 

 

 

 

 

• GL-9000
  

Digit control key making machine.
Special designed digit control key making machine may make semi circular or square key by changing vise only.
Production upon customer's exclusive requirement of specification.
Automatic code selection by computer & permit user to set up cycle number freely upon their requirement.
Equipped tungsten carbide cutters.
Easy operation, times save & high efficiency.

# We make to meet customer's needs for either semi-circular or square keys as aborve.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

• GL-320
  

GL-320 manual keys duplicator is a lightweight, suitable for carrying out the work, can be equipped with indoor electric power or car charger. It weighs only 7 kg, can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ Optional AC or DC voltage.
■ The 4-ways vise can refer your need to hold till to 115mm key.
■ Can copy any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.
■ With lightweight easy to use.
■ Equipped with V type HSS cutter.
■ Rechargeable Power Battery Optional.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

 

 

 

• Rechargeable Two-Way Duplicating Key Cutting Machine

For carrying out the work, with 12V car charger electricity. And also it’s with rechargeable batteries, solved the uneasy on power issue outsider.

It can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ The 4-ways vise can refer your need to hold till to 128mm key.
■ Equipped with V type Tungsten cutter.
■ Equipped with Nylon Brush.
■ Rechargeable Power Battery Optional.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

• GL-320L MANUAL DUPLICATOR

GL-320 manual keys duplicator is a lightweight, suitable for carrying out the work, can be equipped with indoor electric power or car charger. It weighs only 7 kg, can copy the types of keys, including any type of double side grooved key, car keys, motorcycle keys, etc., no extra accessory is required.

■ ⦁ The 4-ways vise can refer your need to hold till to 128mm key.
■ Equipped with V type Tungsten cutter.
■ Equipped with Nylon Brush.
■ Equipped with Nylon Brush.

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

 

• The latest patent new key duplicating machine
  

■ Equipped with high-speed steel plated titanium blade and full tungsten steel saw.
■ Equipped with a new patent right vise jaw set that to increase the cutting process convenience.
■ The latest patents for left and right tracer, the right side is scalable, the feature is attached the spring and adjust to the fixed point can be positioned when the preparation of the key is not easy to shift.
■ Thumb screw got the bearing, strongly tight.
■ LED lighting.
■ Current overload protection, when overheating, the machine got automatic power to protect the device.
■ Left and right vise width 128MM with market needs.
■ Acceptable special with remote control key, square angle cutting key…etc.
Taiwanese Patent No:M540704

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• The latest patent new key duplicating machine
  

■ Equipped with high-speed steel plated titanium blade and full tungsten steel saw.
■ Equipped with a new patent right vise jaw set that to increase the cutting process convenience.
■ The latest patents for left and right tracer, the right side is scalable, the feature is attached the spring and adjust to the fixed point can be positioned when the preparation of the key is not easy to shift.
■ Thumb screw got the bearing, strongly tight.
■ LED lighting.
■ Current overload protection, when overheating, the machine got automatic power to protect the device.
■ Left and right vise width 128MM with market needs.
■ Acceptable special with remote control key, square angle cutting key…etc.
Taiwanese Patent No:M540704

• FOR FOLLOWING KEYS
  

 

 

 

 

 

 

 

 

• New style patented multifunctional key duplicating machine
  

■ New style patented base horizontal flip designed, can move forward, backward, left and right. The cutting key has no bevel; the base is turned over for easy gripping of the key
■ The newly designed four-sided jaw can be directly and easily rotated to change sides.
■ Can be directly prepared with remote control car key, long key... etc.
■Equipped with LED lamps
■Equipped with automatic power-off protection device

• FOR FOLLOWING KEYS